Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Shipper 

The person or legal entity that is sending the goods from point of origin. The shipper does not have to be the owner of the cargo. The shipper can also be referred to as the sender. 

Carrier

The person or legal entity that either owns the vehicle or vessel upon which cargo is transported - or "carried" - or has legal responsibility for physically stewardship of the cargo between two points. 

Receiver

The person or legal entity that is duly authorized authorised to receive cargo on the receiving end. Receivers are also sometimes called "consignees," however the term consignee has specific legal meaning in customs proceedings, while a receiver is more generic could take possession of cargo through a variety of means, domestic or international.

Agent A person or legal entity who is legally and contractually designated to act on behalf of a shipper, carrier or receiver. Agents can act in a variety of functions, from handling goods to processing documentation.
Service ProviderAny contracted third-party entity that offers a service, usually on a for profit basis. A service provider may be involved in a variety of activities, including being an acting agent or a contracted carrier.
"Take Possession" When physical goods are transmitted into the direct care and stewardship of one party, be it a transporter, a warehouse, or customs, that party is said to have "taken possession" of the cargo. Taking possession does not mean the party holding the cargo then owns the cargo, they are only physically holding it for their part of the transport process.
IntermodalAny form of transport that changes between two or more modes of transport. Intermodal transport can be facilitated through the use of containerized containerised shipment, however cargo can also be transported through intermodal means simply by directly loading and offloading through a variety of means. 
Material Handling Equipment (MHE)MHE is any form of mechanical equipment used to facilitate the loading and offloading of cargo, or the movement of cargo around an open space such as a port or a warehouse. MHE includes forklifts, cranes, pallet jacks, and more. 
IncotermsIncoterms -  "International commercial terms" - are mutually agreed upon international shipping terms that designate responsibilities, risks and limitations of shippers, carriers and receivers. Incoterms generally are only applicable and enforceable for international shipments.

...

Historically, the transportation of supplies has been regarded as an ancillary function of little or no central importance. More recently, efficient transportation has been recognized recognised as an essential determinant in providing consistent, quality service to beneficiaries. A good transport system fulfills fulfils the "rights" of supply chain management. That is:

...

In an ideal scenario, goods will arrive as scheduled, at the right price, in maximized loads maximised loads with no breakages or pilferage.

Summarizing this Summarising this thinking into a series of actionable steps, and successfully implementing those steps, will ensure timely and effective delivery of humanitarian assistance. A good transport system complements an efficient distribution system.

...

A transport strategy in a humanitarian context varies from one organization organisation to another and from one situation to another. and is largely dependent on the needs of the response. Some factors to consider when developing a transport strategy are:

...

Transport management in emergencies can be a complex task depending on the nature of the disaster. Humanitarian organisations have increasingly begun to use the joint transport services as a strategy in emergencies, such as those implemented by the Logistics Cluster during emergencies. A joint transportation service is based on a collaborative approach and aims to leverage the advantages of centralized centralised coordination and sharing of assets.

Organizing

...

Transport

In emergency contexts, transport can logically be divided between domestic/local transport and international transport. The general concepts around domestic and international transport remain largely the same, however special considerations are required for both.

Domestic transport movement - Local movements within a specific country will usually involve road transport, however rail, air, river and even at time sea transport can occur in domestic movement. This may involve movement of palletizedpalletised/bulk loads from ports, airports and railyards rail-yards to warehouses and depots, palletizedpalletised/bulk movements between facilities such as warehouses or depots, or delivery of smaller consignments from a local warehouse or depot to end users at a number of destinations in an area. Domestic transport requires actors to follow all local laws and safety regulations.

International movement - International transport requires the transmission of physical goods across a legally defined international border or boundary, and in most normal circumstances requires undergoing standard customs procedures.  The local market will not always be able to provide all the products and services required to fulfill fulfil the needs identified in an emergency response. Response agencies will therefore source goods externally and organize organise the transportation of relief supplies to affected locations. To ensure efficiency and compliance with import regulations the organisations seek service providers with expertise and capacity to handle certain aspects of the movement.

Managing Transport Service Providers

Humanitarian response organizations organisations have increasingly begun to rely on external transport providers. An external transport provider is defined as any third-party who can carry or identify vessels that can carry cargo through commercial means. In the event third-party transport providers are contracted, there has to be a structured approach to the selection process, similar to other forms of procurement, and subsequent monitoring and control of the provider or providers selected. There are a number of important issues to be considered to ensure that a reputable provider, who will provide the adequate level of service, at an acceptable cost, is sourced.

The selection process adopted for the acquisition of all services is covered by the organizationorganisation's approved procurement policy, processes and procedures. Ideally, contracting should be done in a competitive manner, on market terms, and negotiations undertaken in an open and transparent fashion, thus ensuring cost effectiveness and equal opportunities for the appropriate commercial entities.

...

  • Carrier characteristics and capacity.
  • Proven efficiency.
  • Timeliness of delivery.
  • Known integrity, reputation and reliability.
  • Good relationships with other carriers.
  • Financial viability to cover costs of providing the service.
  • Ability to provide a multi-modal service, if need be.
  • Presentation of timely reports and correct invoices.
  • Licensed by the government to conduct customs clearance formalities and be up-to-date on changes in customs requirements.
  • Own or have access to a bonded warehouse to protect and control shipments in transit.
  • Own a trucking fleet for inland transport and have access to specialized specialised vehicles when needed such as container trucks, low-bed trailers, tankers, etc.
  • flexible in their availability at short notice, also outside of office hours and on public holidays.
  • Have influence in the transport market, with port authorities, etc.
  • Experienced in successfully handling duty exemption arrangements for humanitarian organisations.
  • Have an office in the port area or nearby.
  • Have at least a country-wide, preferably a multi-country regional network.
  • Use technology effectively, including a good telecommunications system and, preferably, a computerized computerised tracking system that allows visibility of where shipments are at a given time.

...

Clearing Agents – Commercial third-party companies or individuals who specialize specialise in understanding import and export regulations, and help facilitate the flow of material goods through customs. Though clearing agents may be used for import or export, the majority of their services are employed for getting goods into countries. Import and export regulations are complex and the failure to comply can result in fines or other difficulties. Many countries require an official licensing process for clearing agents, and unless organizations organisations have specific expertise in customs agents should always be consulted for imports of any kind.

...

Routine movements, taking place on a regular basis, need to be planned at the outset. Non-routine movements occurring on an ad-hoc basis will have to be planned when the need arises. Ideally movements should be planned and managed by a transport office or dedicated focal point responsible for determining the appropriate routing for the goods, allocate resources (own or contracted) and inform the destination of estimated delivery time. During movement designated focal points will track the progress of the goods and update delivery times accordingly and will manage the staff involved in the movement and deal with any issues that arise. They will also handle any problems that occur during the movement, liaising with contractors, freight forwarders and shippers as required. The transport office may have to produce the required documentation to cover transit, alternatively they will be responsible for collecting the required documents together for dispatch.

Once movements have been planned and are initiated, it is important to maintain an information flow between all parties involved to ensure the safety and security of the goods and the adherence to service as promised. In environments within which humanitarian aid organizations organisations operate, many events can impact the efficient movement of goods. In natural disaster or conflict zones, the risk to the movement is potentially high. Having up-to-date information on the status of the movement allows problems to be quickly identified and dealt with. Movements in a national context can usually be managed more closely than movements between or across countries. National movements can be usually planned and coordinated more easily while international movements will often be managed by one or more third parties, working in different time zones and in different languages. Often, international movements are planned and managed by a freight forwarder or logistics service provider working within the broad plan to meet the client requirements in terms of movement time and routing.

In addition to identifying the primary methods of transport, aid agencies should consider the smaller intermediary steps. As an example, even though an agency may be able to identify an international air transport method into a country, will there be available trucks to adequately pick up and transport cargo from the airport of reception? The same applies for multiple steps in the process, including the ability to identify adequate warehouse space, the ability to understand and comply with import regulations, and generally be able to accommodate all steps of the supply chain, not just the one step in question. Frequently, aid organizations organisations are operating in a “push” model early in a disaster, and persons associated with organizing upstream transport are not necessarily taking directions from or even communicating with the persons engaged in downstream planning. Proper planning throughout all stages is vital to a good transport strategy.

Standard Documentation

Outside of highly specialized specialised forms of documentation utilized utilised for different modalities of transport, there are several widely accepted documents used in virtually all methods of transport. The purpose of utilizing utilising widely accepted documents is enact some form of traceability and accountability for cargos in transit between all parties who may handle or store the cargo. Widely accepted cargo tracking documentation methods should not be confused with the wide variety of specific documentation required for customs clearance. Customs clearance documents are generally required to certify conformity with national laws, help facilitate tariff revenue, and may be different from country to country. At the very least, agencies should consider using some form of the below documents for all shipments, even domestic shipments between their own managed facilities:

Waybill – A waybill is the ultimate informal “contract” between the sender, the carrier and the receiver of goods. A waybill should contain all relevant information for the shipment itself, including:

  • The contents of the shipment.
  • The point of origin and destination.
  • Names of the shipper/sender, the carrier/driver, and the intended recipient.
  • Dates of the transaction.
  • Important information pertaining to the goods; special handling requirements, delivery instructions, etc.

...

Insuring cargo while in transit can be complex for aid agencies, especially when multiple forms of transport are involved across multiple countries, and into areas of heightened risk, such as natural disasters or protracted armed conflicts. For many agencies, the single largest expenditure of their response activities is the pipeline of relief items heading to affected populations, and proper care should be invested into maintaining this pipeline through risk mitigation measures. Generally there are two approaches organizations organisations use for insuring cargo:

  • Relying on insurance provided by the third-party transporter
  • Developing a self-managed insurance plan

...

Transporter provided insurance can be useful in that it provides coverage for short term gaps, for specific activities that self-insurance isn’t designed for, or last mile activities that have enhanced risks. Cargo may be covered by the overall shipping terms of a contract with the third-party transporter, but it is strongly advised that all organizations organisations relying on third-party transporter provided insurance to confirm the insurance status and requirements with the sender/owner of the goods to be moved. Shippers should understand the level of insurance that the provider will offer to cover the goods it carries on behalf of its clients; often if any insurance cover is offered, it will be fairly nominal and only cover a portion of the real cost of the items.

...

There may be instances where organizations organisations develop long term transport contracts with third-party providers, through which the shipper may not know the full value of every shipment over the contracted period. Such arrangements might be common in landside trucking contracts, which might go for a year or more over a changing response. If organizations organisations wish to utilize insurance provided through the transporter in this case, they will need to develop a strategy to account for potential values of future cargo. This might include designating a maximum ceiling of coverage for any given movement that is roughly equal to or higher than any possible load, or develop a scheme through which cargo value is declared per movement and the third-party transporter adjusts billing accordingly. Organizations organisations should never assume long term contractors will factor different insurance needs into quoting, and should be transparent in the bid process to avoid confusion later on.

Individual cost of third-party provided insurance may be influenced by the reputation of the transporter. In setting up contracts with providers, it is important that the type of insurance be clarified and incorporated in the contract terms. If there is any doubt as to the cover provided, advice from the organisation's office handling insurance should be sought. If insurance costs differ for different transporters, these should be included in the overall cost comparison matrix.

Key elements organizations organisations should consider:

  • Type of insurance: What is covered and to what extent, and where do responsibilities start and stop for the transporter?
  • Duration of insurance coverage
  • The overall process for reimbursement and payment

...

A self-insurance scheme for cargo requires a fairly robust accounting system, whereby organizations organisations intentionally add costs to budgets for cargo movement, but simply keep a small portion of that money in a separate, global pot which can be paid out in case of cargo loss. Self-insurance is useful in that it is quick and efficient and doesn’t require dealing with outside brokers, however it requires a great deal of internal control and analysis. Smaller agencies or agencies that have fluctuating size and types of activities may not be able to adequately predict their global self-insurance needs, and may end up facing substantial global losses.

A method of obtaining global blanket cargo insurance might come from soliciting large international insurance brokerages, who may be able to provide a flat or relatively fixed rate for cargo insurance based on their estimation of risk of any individual agencies’ activities. Global cargo insurance might end up being slightly more expensive per kilogram, but saves substantial amount of time identifying insurance solutions for every transport. The specifics of a global insurance plan would be negotiated based on the need of the requestorrequester. As an example, if an aid agency maintains a large fleet of self-managed cargo vehicles in many high-risk countries, there may be a need to develop a high annual global premium to cover all risks associated with cargo movement. On the other hand, if an aid agency is largely only doing international transport using regular carriers, then insurance may be issued on a case by case basis.

Incoterms

 International International Commercial Terms Terms (Incoterms) used in international contracts of sale are widely agreed upon, pre-defined commercial terms for defining limits of risk, cost and liability for any form of international transport, detailing the roles and responsibilities of the shipper, the carrier and the receiver/consignee. Incoterms are negotiated and set by the International Chamber of Commerce (ICC), and are connected to various forms of international trade law and maritime time. Incoterms were established in the 1920s, and are now generally updated every ten years, with the most recent update in 2020.

Incoterms function as a short hand for all parties involved with an international shipment, and allow for different parties to quickly reference and understand where their obligations lie. The shipper in this context may be the supplier of goods, or it may be the party purchasing the goods and arranging for transport. The contracted carrier transporting the goods may only function as a broker or intermediary, but  will be able to reference Incoterms when dealing with the shipper to fulfill fulfil its obligations. Organizations organisations that are planning international procurement and shipment should seek to include Incoterms in both their procurement and transportation contracts. 

...

FAS

Free Alongside Ship

The seller turns over possession when the goods are placed alongside the vessel (e.g., on a quay or a barge) nominated by the buyer at the named port of shipment. The risk of loss of or damage to the goods passes when the goods are alongside the ship, and the buyer bears all costs from that moment onwardsonward.

FOB

Free on Board

The seller turns over possession of the goods on board the vessel nominated by the buyer at the named port of shipment. The risk of loss or damage to the goods passes when the goods are on board the vessel, and the buyer bears all costs from that moment onwardsonward, including insurance.

CFR

Cost and Freight

The seller turns over possession of the goods on board the vessel. The risk of loss of or damage to the goods passes to the buyer when the goods are on board the vessel, however the seller must contract for and pay the costs and freight necessary to bring the goods to the named port of destination.

CIF

Cost, Insurance and Freight

The seller turns over possession of the goods on board the vessel. The risk of loss of or damage to the goods passes to the buyer when the goods are on board the vessel. The seller must contract for and pay the costs and freight necessary to bring the goods to the named port of destination. The seller also contracts for insurance cover against the buyer’s risk of loss of or damage to the goods during the carriage, however the seller is only required to obtain minimum cover insurance. Should the buyer wish to have more insurance protection, it will need either to agree as much expressly with the seller or to make its own extra insurance arrangements.

...

A mode of transport is the means by which goods and material are transferred from one point to another. The basic modes of transport are:

  1. Air
  2. Sea / Riverway River-way
  3. Road
  4. Rail

See below a mode comparison matrix for different modes.


Road

Rail

Sea/RiverwayRiver-way

Air

Relative Speed

Moderate

Moderate

Slow

Very High

Reliability

Good

Good

Limited

Very good

Cost per kg

Medium

Low/Medium

Low/Very Low

High

Flexibility

High

Low

Low

Medium

Other Considerations

Extensive Network

Limited and fixed infrastructure

Restricted Network

Limited Network

Short and medium distances from neighbouring country to operation site; internal transport for short and medium distances

Large consignments from port of discharge to inland operation site; ecological

Large quantities; less urgent; pre positioning phase; long distances with no time constraint

Emergency phase; expensive goods; fragile or perishable goods; cold chain; no alternative option; small shipments; e.g. diplomatic pouches; long distance with time constraint.

Advantages

Relatively fast; no transshipment; direct delivery; flexible; cost

Economical; large loading capacity; range and speed (context depending)

Economical; large loading capacity; no restriction on loading capacity; cheap

Fast; reliable; limited losses; direct; easy tracking and tracing

Disadvantages

Roads may be dangerous or blocked; sometimes driver nationality or vehicle registration not acceptable

Difficulty finding freight cars; frequent delays; transshipping required; inflexible; limited tracking

Slow; transshipping at ports; use as a second means of transport at high volumes; higher theft risk in ports; not flexible

Expensive; restricted to journey’s between airports; restricted loading capacity; special considerations (dangerous goods, size limits, packing, etc.)

...

Whilst the physical characteristics of certain goods and supplies may determine a specific mode of transport, most goods will be capable of being moved by a variety of modes. Customer requirements and constraints on the organisation providing the transport must be considered. In humanitarian aid situations, it is often environmental factors, such as the destruction of roads and railways that have a significant impact on mode selection.

It is important to fully recognize recognise the operational characteristics of the mode or modes that have been selected. It is also necessary to consider the type of vehicle or equipment that will be used within that mode. Prior to making a decision on the mode of transport, it would be useful to create a matrix ranking of influential factors for choosing transport modes. Some factors to consider in the rating:

...

  • Outer Packing/Outer Packaging - The outer most enclosure that contains or prevents unintended release of contents 
  • Over-Packaging/Overpacking - Items that are packaged in more than one layer or enclosure. Example: A box within a box, or multiple sacs within a larger carton. Over-packaging is common in handling of dangerous goods
  • Handling Unit - The lowest unit at which cargo is handled, usually at the box or carton level.
  • Unit of Accounting - the lowest level inventory unit that is tracked and accounted for. 
  • Shipping Unit - the lowest unit at which cargo is handled for shipping - may be the same as the handling unit, or may be accounted for at the pallet/Unit Load Device level. 
  • Common Package Types:
    • Bale/Bundle 
    • Carton/Box
    • Roll
    • Pallet
    • Set/Kit
    • Crate
    • Drum
    • Bag/Sack
    • Loose/Bulk/Individual Unit

...

Labelling

Labeling Labelling for transport is an important consideration. Knowing that cargo is often broken down or shipped loose means that shippers must adequately mark cartons to facilitate tracking of cargo, especially for cargo transported by air. Insurance brokers also have the right to dishonor dishonour a claim of damage to goods, due to inadequate packing and marking for the selected mode of transport. It is strongly advised that all cargo intended for air transport be labelled at the level of the carton or handling unit, and should have some - if not all - of the corresponding data:

...

Properly labelled packages will help reduce loss while in transit. Professional freight forwarding services tend to be extremely good at keeping large consignments together throughout the course of an air movement. Depending on the arrangement with the forwarder, large consignments can be split into multiple smaller shipments, and will be reconsolidated re-consolidated prior to delivery. In emergencies however, movement can be chaotic and cargo frequently delayed or lost. The more visible and easily identifiable relief cargo is, the more likely it is to reach its final destination.

The International Organization organisation of Standardization Standardisation (ISO) has designed graphic symbols that are placed on packing units to instruct cargo handlers how to handle the cargo. These symbols are used worldwide and is a common language understood by all.

Any and all cargo containing dangerous goods being packaged for transport should be properly labeled labelled according to the equivalent standard of the method of shipping. Information on proper labeling labelling of dangerous goods of can be found in the dangerous goods section of this guide.

...

Templates and Tools

INCOTERMS 2020

TEMPLATE - Waybill

TEMPLATE - Packing List

TEMPLATE - Proforma Invoice

TEMPLATE - Cargo Manifest (Flights)

Full Template Package